Repairing or Replacing a Doorknob
Just as new knobs can give a kitchen a brand-new look, door knobs can really update the feel and look of your home. Are your doorknobs in good shape? Could they use a little updating? Are they lose or malfunctioning? If your doorknobs are dingy, you will be surprised at how simply changing them can really add to the look, feel, and cleanliness of your home.
Doorknobs are not too expensive and relatively easy to install. They come in a variety of shapes, sizes, colors, and locking mechanisms. If you are changing out an old door knob, make sure your replacement is the same size. Most doorknobs are standard and interchangeable, but you want to make sure.
Essentially, you can approach replacing or fixing a door knob in the same way. Typically, if your doorknob is loose or is in need of repair, you can simply replace the whole thing, or you can take it apart and tighten it up. Either way, the steps will be the same.
How to replace or fix a doorknob:
Out with the old:
1. Take the old doorknob out of the door by first removing the trim (the metal ring on the door surrounding the knob). Using a screwdriver, unscrew the two screws that hold the trim to the door. If the trim does not come off when you unscrew it, you may need to use a scraper or flat-head screwdriver to ease it off.
2. Next remove the two screws on either side of the door knob mechanism. These are what hold the mechanism (and the two doorknobs) together.
3. Take a good look at how the doorknobs come apart. This will help when you install the new ones.
4. Take the old doorknobs out and set them aside.
5. You will be left with just the bolt (or the locking mechanism). Remove the two screws that hold this in the door, and remove the bolt.
6. Does the strike plate also need to be replaced? Take a look at it. If it’s in good shape (and matches the color of the new doorknob) then keep it. If not, remove the two screws that hold it to the doorjamb and set it aside.
In with the new:
1. Take the bolt section and place it into the opening. Doorknob bolts have one side that is slanted. Make sure the slanted side faces the direction in which the door closes.
2. Screw in the bolt section with the screws provided.
3. You should have two doorknobs and two trims. Take the first trim and put it up to the door, covering the bolt section.
4. Take one of the doorknobs (the one with the mechanism that fits in the bolt—usually a square hole) and put it through the trim and the bolt.
5. Take the other doorknob and trim piece and put it on the other side of the door. Make sure you align these correctly. Remember the two long screws you took out of the old doorknob? Well, this one needs those too, so make sure they all line up.
6. Put in the long screws. Begin to tighten each just a little; going back and forth between both sides to make sure that the knob is coming together evenly.
7. You will now need to put the strike plate onto the door jamb.
1. Take a pencil and mark up the end of the bolt.
2. Close the door and turn the handle so that the bolt gently hits the doorjamb. Repeat this a few times.
3. This should leave a mark on the doorjamb. The mark will show you where you need to place the strike plate. You may need to use a chisel to adjust the previous hole.
4. Place the strike plate in the correct area, and attach it with the screws provided.
5. Test the lock a few times from both the inside and the outside to ensure that it has been assembled properly. Adjustments may need to be made.
6. If the strike plate seems loose, you may need to buy longer screws to get a tighter fit.
When you take apart your old doorknob, keep all the pieces together or even reassemble them. Having this as a reference when you put in your new doorknob will be really helpful.
Have patience. Doorknobs have a lot of tiny little pieces, which can disappear and cause contusion, so go slow. You’ll do just fine!