Paint Textured Walls

Textured wall surfaces, like stucco and raised paneling, require special attention when you’re painting them! I have some ideas to help you!

1. Prep work is the same for this job as any other paint job, cover floors, open windows and tape off anything that you don’t want painted.

2. To tackle this job, you need a few things. A long nap roller to reach into crevices on a surface. A wide paintbrush – commonly called a wall brush. You get better coverage with this.

3. Cut in the edges using a regular brush; wiggle the brush back and forth while cutting the lines so you’re sure to get into the little nooks and crannies.

4. Now to paint the wall, use the large wall brush in a cross hatching or diagonal back and forth motion over the surface to give yourself nice even coverage. Cross-hatching will do a couple of things. It will get into the crevices and also ensures a random pattern so you won’t see brush strokes, which could be a problem if you used an up and down straight technique. If you prefer you can use the long nap roller, but I like the coverage I get with the brush.


Painting tips & tricks

Rub petroleum jelly on the hinges and door knobs before you start to paint a door. If you get paint on them, they will wipe off easily.

To keep white paint from yellowing, add 2 drops of black paint to each Gallon of white.

When painting ceilings, cut a child’s rubber ball in half and put your paint brush in one of the halves to catch the drips.

An old pair of swimming goggles will protect your eyes from paint splatters and drips when painting ceilings.

When painting, protect your hands and face with moisturizer. Cleanup will be easier and the moisturizer will prevent paint from seeping into the pores.

To stop paint from dripping, punch a few holes in the rim of the paint can. When the brush is wiped against the edge, the paint flows back into the can. The lid covers the holes so the paint won’t dry out.

Before pouring paint from a can, cover the rim with masking tape. After pouring, remove the tape — the rim will be clean and the cover will fit tightly.

To remove lumps from paint: Cut a piece of screen to fit the inside of the paint can. Set it on top of the paint and let it float down to the bottom of the can. It will take all the lumps with it, trapping them at the bottom of the can.

When painting a room, dip a small card into the paint so that you have the exact colour with you and can match accessories in store.

When painting inside corners, trim the paint brush bristles to a V to save strokes and spread paint more easily.

When you poke a paint brush into corners or allow it to rest on the bottom of the paint can, the bristles curl and stray. To straighten natural bristles (not synthetics), try wrapping the brush in a couple of thicknesses of damp cloth and press gently with an iron. The steam and cloth binding do the job. Only light pressure is needed. Let the bristles cool before you unwrap the brush.

When painting old woodwork fill in the holes or cracks with a mixture of flour and some of the paint you are using. It hardens like cement and matches perfectly.