Bathtub – Household Solutions

Household solution simple and effective products is fun and economical. We think you will be happily surprised with the results.

Bathtub – Household Solutions

Clorox Bleach. To clean the caulking around the rim of a bathtub, fill a trigger-spray bottle with a solution of three-quarters cup Clorox Bleach and one gallon water, spray the caulking, wait five minutes, and wash clean. The bleach kills the mold and mildew. Repeat if necessary.

Smirnoff Vodka. Clean the caulking around bathtubs by filling a spray bottle with Smirnoff Vodka, spray the caulking, wait five minutes, and wash clean. The alcohol in the vodka kills the mold and mildew. Repeat if necessary.

Bathtub > Cleaning

Arm & Hammer Baking Soda. To clean a bathtub, sprinkle Arm & Hammer Baking Soda on a damp sponge, scrub, and rinse clean.

Cascade. For a powerful way to clean grease, grime, and rust stains from the bathtub, fill the tub with hot water, add two tablespoons Cascade dishwasher detergent, and let stand for about ten minutes. Use an abrasive sponge to scrub any stains and then rinse clean with water. The phosphates in the Cascade whiten even the dirtiest tubs. Repeat if necessary.

Dawn Dishwashing Liquid. To clean soap scum from a bath tub, pour Dawn Dishwashing Liquid on the stained area, let sit overnight, and rinse clean with water. Dawn Dishwashing Liquid cuts through grease and cleans older tubs without harming the finish.

Easy-Off Oven Cleaner. For really tough grease stains or mineral deposits, put on protective eyewear and rubber gloves and spray Easy-Off Oven Cleaner over the stubborn spots on your bathtub. Let set for thirty minutes, making sure the room is well ventilated. Scrub gently with an abrasive sponge and rinse clean with warm water.

Gillette Foamy. To clean the bathtub and let your kids have a blast at the same time, give your kids a can of Gillette Foamy shaving cream to entertain themselves in the bathtub. They can use the shaving cream to draw on the tile walls, and when you wash the condensed soap off with water, the bathtub will be sparkling clean. Your kids will come out amazingly clean as well.

Heinz White Vinegar. To make cleaning mineral deposits from hard water from your bathtub easier, fill the bathtub with hot water, pour in four cups Heinz White Vinegar and let sit overnight. The acetic acid in the vinegar breaks up the mineral deposits, making them easier to scrub off with an abrasive sponge.

Jet-Dry. To clean hard water stains from a bathtub, fill the bathtub with hot water, pour in four ounces Jet-Dry, and let soak for a few hours. This softens the hard-water build-up, making it easier to remove.

L’eggs Sheer Energy Panty Hose. To scrub the bathtub and bathroom tiles, ball up a clean, used pair of L’eggs Sheer Energy Panty Hose. The nylon is a mild abrasive and doubles as a scouring pad. Or for more fun, wear the panty hose and roll around in the bathtub and against the tile walls.

McCormick Cream of Tartar and Hydrogen Peroxide. To remove a stain from the bathtub, make a thick paste from McCormick Cream of Tartar and hydrogen peroxide, apply the paste to the stain, and let dry. Scrub with a brush and rinse thoroughly.

Skin So Soft Body Lotion. To remove a ring from the bathtub, add three capfuls Skin So Soft Body Lotion under the faucet while filling the tub with hot water. Use a sponge to wipe the ring right off.

Bathtub > Decal Removal

Jif Peanut Butter. Coat the decals in the bottom of the bath tub with Jif Peanut Butter and let sit for one hour. The peanut oil dissolves the glue between the decals and the tub. Then use a single-edge razor blade to carefully scrape the decals off the tub floor.

Shout. To make decals easier to remove, spray the decals with Shout Stain Remover, let sit for five minutes, fill the tub with water, and let soak for one hour. Using a single-edge razor blade, carefully scrape the decals off the tub floor.

Bathtub > Drain Stopper

Wilson Tennis Balls. If you lose the drain plug for your shower, sink, or bathtub, you can use a Wilson Tennis Ball to block the drain. The suction keeps the tennis ball in place.

Bathtub > Faucets

Cover Girl Continuous Color Classic Red. To adjust the water in the bath effortlessly, turn on the bathtub faucet(s) to the temperature you prefer, then mark the faucet(s) and the wall with dots of Cover Girl Continuous Color Classic Red Nail Polish so they can be aligned immediately every time you bathe.

Bathtub > Leaks

DAP Caulk. If a bathtub seems to be leaking, the cause may not be the tub itself. Water may be leaking into walls through the seams where the tub meets the tile wall, from around a soap dish, or from around the faucet or spout. Caulk around these areas.

Bathtub > Mildew

Parsons’ Ammonia. To remove mildew from walls, scrub with equal parts Parsons’ Ammonia and water. Make sure the room is well ventilated and rinse clean with water.

Tidy Cats. To prevent mildew in a bathtub when you leave your home for a long time, pour unused Tidy Cats cat box filler in a flat box and place it in your bathtub. (If you have cats, be sure to keep the bathroom door closed so they don’t use the cat box filler in the tub.)

Bathtub > Polishing

Turtle Wax. After cleaning your bathtub, rub Turtle Wax into the tub, tiles, and faucets with a soft cloth, buffing as you go along. (Do not use Turtle Wax on the bathtub floor; otherwise you risk slipping.)

Bathtub > Rust Stains

Coca-Cola. To clean rust stains from a bathtub, cover the stains with Coca-Cola, let sit for one hour, and rinse clean. The phosphoric acid in the Coke removes the rust.

20 Mule Team Borax and ReaLemon. To clean rust stains from a bathtub, scrub with a paste made from 20 Mule Team Borax and ReaLemon lemon juice.

Bathtub > Whirlpool Baths

Cascade. To clean pipes and tubes in a whirlpool bath, fill the bathtub with enough warm water to run the whirlpool. Add two cups Cascade dishwasher detergent and run the system for fifteen minutes, then drain the water. Refill with fresh water and run the system for one minute to rinse it clean.

Bathtub Stopper Defective

Problem: The stopper in the tub doesn’t operate, doesn’t seal, or causes slow drainage.

Background: Two basic stopper mechanisms are found in tubs. One is the trip-lever type which uses a trip lever to open and close a brass stopper inside the tub’s drain. These have a strainer, instead of a stopper, at the drain opening. Another is a pop-up type, in which the lever is linked to the stopper at the drain opening.

What to do: Both types can be taken apart by removing the 2 screws on the decorative overflow plate, lifting the plate off, and then working the mechanism out through the over flow hole. For trip-lever types, clean the mechanism of debris and apply small amounts of grease on its moving parts. For pop-up types, clean off debris and check the condition of the 0-ring, which is positioned underneath the top lip of the stopper. If the 0-ring is worn or missing, replace it with a new one. If the pop-up stop per doesn’t work even with the new 0-ring, remove it and check to see if the linkage needs adjustment. Link age that is adjusted so that it is too long will keep the stopper from sealing properly.

Special advice: Keep in mind that accumulated hair on the linkage of a pop-up mechanism can cause slow drainage. When adjusting linkage on this type of mechanism, make small adjustments at any one time, by turning the threaded rod into the brass yoke, which connects to the trip lever.

Helpful hint: If the stopper mechanism seems to be unrepairable, or if you only need to replace components, take the entire mechanism when you go to the store so you will be sure to get the right parts.