Caulk Failures Interior Paint Solution

Caulk Failures: Loss of caulk’s initial adhesion and flexibility, causing it to crack and/or pull away from the surfaces to which it is applied.

Possible Causes:

Use of lower quality caulk.

Use of wrong type of caulk for particular application (e.g., using latex or vinyl caulk in areas where there is prolonged contact with water or considerable movement of the caulked surfaces).

Solution:

Use a top quality water-based all-acrylic or siliconized acrylic caulk if prolonged contact with water is not anticipated. These caulks are flexible enough to adapt to minor fluctuations in the substrate, stretching in gaps that widen slightly over time. They also adhere to a wide range of interior building materials, including wood, ceramic tile, concrete, glass, plaster, bare aluminum, brick and plastic — even in areas where moisture is present. Note: Silicone caulk should not be painted.


Painting tips & tricks

Rub petroleum jelly on the hinges and door knobs before you start to paint a door. If you get paint on them, they will wipe off easily.

To keep white paint from yellowing, add 2 drops of black paint to each Gallon of white.

When painting ceilings, cut a child’s rubber ball in half and put your paint brush in one of the halves to catch the drips.

An old pair of swimming goggles will protect your eyes from paint splatters and drips when painting ceilings.

When painting, protect your hands and face with moisturizer. Cleanup will be easier and the moisturizer will prevent paint from seeping into the pores.

To stop paint from dripping, punch a few holes in the rim of the paint can. When the brush is wiped against the edge, the paint flows back into the can. The lid covers the holes so the paint won’t dry out.

Before pouring paint from a can, cover the rim with masking tape. After pouring, remove the tape — the rim will be clean and the cover will fit tightly.