Cracking Flaking Interior Paint Solution

Cracking Flaking: The splitting of a dry paint film through at least one coat as a result of aging, which ultimately will lead to complete failure of the paint. In its early stages, the problem appears as hairline cracks; in its later stages, flaking occurs.

Possible Causes:

Use of a lower quality paint that has inadequate adhesion and flexibility.

Over thinning or overspreading the paint.
Inadequate surface preparation, or applying the paint to bare wood without first applying primer.

Excessive hardening and embrittlement of alkyd paint as the paint job ages.

Solution:

Remove loose and flaking paint with a scraper or wire brush, sanding the surface and feathering the edges. If the flaking occurs in multiple layers of paint, use of a filler may be necessary. Prime bare wood areas before repainting. Use of a top quality primer and top coat should prevent a recurrence of the problem.


Painting tips & tricks

Color Frequently asked questions

How do colors effect room size?
Generally, warm colors like reds, oranges, and yellows close in a space. Blues, greens, and violets tend to make a room look larger. Dark colors have a diminishing effect. Whites are always a good choice for making a room look larger.

My room has a chair rail and I am using two colors….?
This depends on the look you want to achieve. If you want an open, airy look, always paint the portion of the wall below the chair rail darker allowing the lighter color to dominate.

Should trim work be painted the same color as the walls…?
Use the same color to hide trim work, use a lighter or darker color to bring out the trim work and add highlights.

Will the paint I choose look lighter or darker on the wall?
Larger surfaces make the paint appear darker. As a general rule, always choose colors that are a shade or two lighter than what you want. Do keep in mind that colors can also appear lighter or darker depending on surrounding colors and lighting.

What is the best way to decide which color is best for my room?
Take color chips home to determine the color of your room. A nice technique is to hold the color chips in the daylight and at night so you will see how lighting will effect your color choices.

What color should I paint my ceiling?
White or off-white colors will create the illusion of having a higher ceiling and more open space. Whereas medium to dark colors will create the illusion of lowering the ceiling. Customarily, white or off-white tend to be used.

Will the paint actually match the color chip?
As a general rule, paint on a color chip will appear slightly lighter than when applied in a room. Always take into account the sheen of the paint, the lighting in the room, and other colors that are in the room.

Color Ideas For Interior Painting

The main element in painting is color. The different color of paints gives life to any room whenever it’s applied. It is therefore important to choose the right color for each room of your house. Interior painting is a job for the professionals, but did you know that with a little knowledge in the colors used for interior painting, you can do it yourself and do a great job at that?

Yes, that’s right. Paints are widely available in all colors and shades but not all individuals are aware of the color’s quality. Paints have different working characteristics like miscibility, viscosity, drying time, solubility, and many others. You need to consider these things before purchasing any paint for your home.

Have you seen interior walls that are uninviting and dull? Well, say goodbye to those walls because it is now possible to have a welcoming and cozy room each time you arrive from work.

Paints used for interior painting and even for the exterior are conveniently sold at paint shops, DIY shops, and hardware shops in your locality. You can look through their wide variety of paint colors and choose one that fits your indoor. Usually these stores provide a chart of the different paint colors available. Almost all interior painting is done with the use of oil-based or water-based paints.

When planning your color schemes and paint finishes, don’t forget to consider your home’s style and age. If you incorporate decorative painting in your interior painting project, you are guaranteed to get the best results and you’ll be happier with it. So whatever your look, style, color preference, or mood, you can easily find decorative paint finishes that can greatly enhance your home’s interior areas. You should also not forget to consider your furnishing’s color and the feel that you want to create.

You will probably need good color ideas to go about your interior painting. To start with, if you decide to use decorative painting more than one room inside the house, try to get varying tints of the color that you want to paint and that includes the plain color.

If one of your rooms have existing fabrics but you really want it to be updated, you can paint the wall with the similar color or shade by using a fresh technique. You should also match the finishes to every room’s unique style.

For your private retreats such as your bedroom, use a special paint finish because this is the place where you usually spruce up or calm down. Be sure to choose a color that unifies with your furniture; this can enhance the entire decorating look which you can enjoy to the fullest.

If you prefer latex paint, well, they provide a tough finish. If you use it together with varnish, you can use it for many applications. It dries quickly, safe, and is odorless.

If you go for neutral colors, you can use them as backdrops. Some people prefer to use them alone because these neutral colors generate a harmonious design. And because the color doesn’t change suddenly, they create a different impression of space and light.

Don’t rush yourself, in fact, try to take time and experiment on different color combinations for your interior painting. Remember, in order to achieve your desired effect or finish, you must purchase the right type and amount of paint.

Caulk Failures Interior Paint Solution

Caulk Failures: Loss of caulk’s initial adhesion and flexibility, causing it to crack and/or pull away from the surfaces to which it is applied.

Possible Causes:

Use of lower quality caulk.

Use of wrong type of caulk for particular application (e.g., using latex or vinyl caulk in areas where there is prolonged contact with water or considerable movement of the caulked surfaces).

Solution:

Use a top quality water-based all-acrylic or siliconized acrylic caulk if prolonged contact with water is not anticipated. These caulks are flexible enough to adapt to minor fluctuations in the substrate, stretching in gaps that widen slightly over time. They also adhere to a wide range of interior building materials, including wood, ceramic tile, concrete, glass, plaster, bare aluminum, brick and plastic — even in areas where moisture is present. Note: Silicone caulk should not be painted.


Painting tips & tricks

Rub petroleum jelly on the hinges and door knobs before you start to paint a door. If you get paint on them, they will wipe off easily.

To keep white paint from yellowing, add 2 drops of black paint to each Gallon of white.

When painting ceilings, cut a child’s rubber ball in half and put your paint brush in one of the halves to catch the drips.

An old pair of swimming goggles will protect your eyes from paint splatters and drips when painting ceilings.

When painting, protect your hands and face with moisturizer. Cleanup will be easier and the moisturizer will prevent paint from seeping into the pores.

To stop paint from dripping, punch a few holes in the rim of the paint can. When the brush is wiped against the edge, the paint flows back into the can. The lid covers the holes so the paint won’t dry out.

Before pouring paint from a can, cover the rim with masking tape. After pouring, remove the tape — the rim will be clean and the cover will fit tightly.

Burnishing Interior Paint Solution

Burnishing: Increase in gloss or sheen of paint film when subjected to rubbing, scrubbing or having an object brush up against it.

Possible Causes:

Use of flat paint in high trafficked areas, where a higher sheen level would be desirable.

Frequent washing and spot cleaning.
Objects (furniture, for example) rubbing against the walls.
Use of lower grades of paint with poor stain and scrub resistance (see Poor Stain Resistance and Poor Scrub Resistance.)

Solution:

Paint heavy wear areas that require regular cleaning (e.g., doors, window sills and trim with a top quality latex paint, because this type of paint offers both durability and easier cleaning capability. In high traffic areas, choose a semi gloss or gloss rather than a flat sheen level.

Clean painted surfaces with a soft cloth or sponge and non-abrasive cleansers; rinse with clean water.


Painting tips & tricks

Drying paint and the temperature
Paint in a ventilated and temperate space. When temperatures are between 10C and 32C there’s no risk, although 15c to 22C is ideal. Latex paint will dry in a few hours at this temperature. Oil-based paints will dry more rapidly in a warm, dry environment.

Wood preparation before painting
When we paint wood, we’re decorating it, but we can also protect it for good if the surface is prepared properly. New wood must be sanded along the grain. Painted or stained wood as well, unless you strip it down to its bare surface. Pores, screw and nail holes can be filled with plastic wood or joint compound, according to the case. Remove all accessories to minimize trimming. Paint over knots with orange shellac to hide them forever. Finally, be sure that the wood is dry and clean.

Painting old moldings
Over the years and after many coats of paint, door frames, windows and wall molding joints are no longer well defined and easy to trim. Carefully trace over the joints with a plasterboard knife using a yardstick if necessary. The traced cut will act as a paint dam? as long as you don’t use too much.

Paint without removing fixtures
To avoid having to remove fixtures before painting, particularly when the pieces are difficult to get off, nothing works like Vaseline petroleum jelly. Just spread it on the surfaces to be protected before starting to paint and when finished, clean the fixtures with a paper towel or a soft cloth.

Blocking Interior Paint Solution

Blocking: Undesirable sticking together of two painted surfaces when pressed together (e.g., a door sticking to the jamb).

Possible Cause:

Not allowing sufficient dry time for the coating before closing doors or windows.
Use of low quality semi gloss or gloss paints.

Solution:

Use top quality semi gloss or gloss acrylic latex paint. Low quality latex paints can have poor block resistance, especially in warm, damp conditions.

Follow paint label instructions regarding dry times. Acrylic latex paints generally have better early block resistance than vinyl latex paints, or alkyd or oil-based paints; however, alkyds develop superior block resistance over time. Application of talcum powder can relieve persistent blocking.


Painting tips & tricks

Helpful Tip
When taking a break, don’t leave your brushes or rollers sitting in paint. Cover trays with a damp rag.

Giving old wood a fresh look
Exterior wood siding can be painted, or stripped and painted. Strip paint using a torch by burning the old paint and scraping it lightly being careful not to damage the wood. Clean the surface with trisodium phosphate (TSP), which you can find in the paint department of your local home renovation centre. Repair siding where needed and caulk. If you are repainting in the same colour, apply the finishing coat after the wood is dry. If you are changing colours, apply a primer coat followed by the new colour, using exterior paint (an oil based primer will be necessary if going from oil to latex). Avoid painting in full sun, at sunset, in the early morning, in the rain or in the wind. To keep bugs from sticking to the fresh paint, simply add two tablespoons of citronella to the paint.

Finishing product: paint, stain, varnish, etc.
Different customers have different needs. No product meets every need. To select the appropriate product, start by identifying your needs based on the following specific criteria in order to create a “funnel” leading to your ideal product. The product selection process is simple, effective and based on eight product selection criteria: function, environment, surface, use, composition, appearance, colour and quality.

Masking knots before painting
Knots in finished wood will appear sooner or later after painting. Before painting, seal the knots with a lacquer. It is the only liquid sealant that will efficiently seal in knot resin, without discoloring the finishing paint.

Blistering Interior Paint Solution

Blistering: Bubbles resulting from localized loss of adhesion and lifting of the paint film from the underlying surface.

Possible Causes:

Applying oil-based or alkyd paint over a damp or wet surface.
Moisture seeping into the home through the exterior walls (less likely with latex paint).

Exposure of latex paint film to high humidity or moisture shortly after paint has dried, especially if there was inadequate surface preparation.

Solution:

If blisters do not go all the way down to the substrate: Remove

blisters by scraping and sanding, and repaint with a quality acrylic latex interior paint.

If blisters go down to the substrate: Remove the source of moisture, if possible. Repair loose caulking; consider installing vents or exhaust fans. Remove blisters as above, remembering to prime before applying the top coat.